Surface passivation in n-type silicon and its application in silicon drift detector

Based on the surface passivation of n-type silicon in a silicon drift detector(SDD), we propose a new passivation structure of SiO2/Al2O3/SiO2 passivation stacks. Since the SiO2 formed by the nitric-acid-oxidation-of-silicon(NAOS)method has good compactness and simple process, the first layer film is formed by the NAOS method. The Al2O3 film is also introduced into the passivation stacks owing to exceptional advantages such as good interface characteristic and simple process. In addition, for requirements of thickness and deposition temperature, the third layer of the SiO2 film is deposited by plasma enhanced chemical vapor deposition(PECVD). The deposition of the SiO2 film by PECVD is a low-temperature process and has a high deposition rate, which causes little damage to the device and makes the SiO2 film very suitable for serving as the third passivation layer. The passivation approach of stacks can saturate dangling bonds at the interface between stacks and the silicon substrate, and provide positive charge to optimize the field passivation of the n-type substrate.The passivation method ultimately achieves a good combination of chemical and field passivations. Experimental results show that with the passivation structure of SiO2/Al2O3/SiO2, the final minority carrier lifetime reaches 5223 μs at injection of 5×10¹⁵ cm^-3. When it is applied to the passivation of SDD, the leakage current is reduced to the order of nA.     

Study of the performances of an oxygen carrier: Experimental investigation of the binder's contribution and characterization of its structural modifications

The aim of this work is to investigate the contribution of the binder (NiAl₂O₄) on the performances of the oxygen carrier NiO/NiAl₂O₄. To this purpose, oxidation/reduction cycles have been performed in a fixed bed reactor using CO as a fuel. The results reveal that the binder can react with the fuel to form CO₂, and that its total reduction capacity increases with temperature. XRD characterizations performed on the binder (on the fresh and after several cycles) show a shift of the diffraction peaks of NiAl₂O₄ toward the ones of γ-alumina, which can be attributed to a progressive decomposition of NiAl₂O₄ to alumina and NiO.     

Salt effect on molecular orientation at air/liquid methanol interface

The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy(SFG-VS). We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.     

Simultaneous determination of erlotinib and its isomeric major metabolites in human plasma using isocratic liquid chromatography–tandem mass spectrometry and its clinical application

This study developed a method for the simultaneous determination of erlotinib and its isomeric major metabolites, OSI‐413 and OSI‐420, in human plasma using an isocratic liquid chromatography–tandem mass spectrometry. Plasma specimens deproteinized with acetonitrile were separated using a 3‐µm particle size octadecylsilyl column. The m/z values of the precursor and product ions for the analytes were as follows: erlotinib, 394.2/278.2; and OSI‐413 and OSI‐420, 380.2/278.2. The total run time was 21 min and no peaks interfering with the analytes and internal standard (d₆‐erlotinib) in human plasma were observed. The calibration curves of erlotinib, OSI‐413 and OSI‐420 were linear over the concentration ranges of 10–3000, 2–500 and 2–100 ng/mL, respectively. The pretreatment recovery ratios were >86.1%. The intra‐ and inter‐assay precisions and accuracies were <12.7 and 89.0–108.9% for all analytes. This validated method was applied to the determination of plasma samples in lung cancer patients receiving 150 mg of oral erlotinib. The plasma concentration ranges of erlotinib, OSI‐413 and OSI‐420 were 373–2354, 15.7–379 and 2.5–43.6 ng/mL, respectively. In conclusion, the present method can be helpful for evaluating the plasma exposures of erlotinib and its major isomeric metabolites in clinical settings. Copyright © 2014 John Wiley & Sons, Ltd.     

Simple and Precise Quantification of Iron Catalyst Content in Carbon Nanotubes Using UV/Visible Spectroscopy

Iron catalysts have been used widely for the mass production of carbon nanotubes (CNTs) with high yield. In this study, UV/visible spectroscopy was used to determine the Fe catalyst content in CNTs using a colorimetric technique. Fe ions in solution form red–orange complexes with 1,10-phenanthroline, producing an absorption peak at λ=510 nm, the intensity of which is proportional to the solution Fe concentration. A series of standard Fe solutions were formulated to establish the relationship between optical absorbance and Fe concentration. Many Fe catalysts were microscopically observed to be encased by graphitic layers, thus preventing their extraction. Fe catalyst dissolution from CNTs was investigated with various single and mixed acids, and Fe concentration was found to be highest with CNTs being held at reflux in HClO₄/HNO₃ and H₂SO₄/HNO₃ mixtures. This novel colorimetric method to measure Fe concentrations by UV/Vis spectroscopy was validated by inductively coupled plasma optical emission spectroscopy, indicating its reliability and applicability to asses Fe content in CNTs.     

Development and validation of a bioanalytical method by LC‐MS/MS for the quantification of the LAFIS 10 – an antimalarial candidate – and its pharmacokinetics first evaluation

A rapid and highly sensitive method by LC‐MS/MS was developed and validated for the quantification of an antimalarial candidate (LAFIS10) in rat plasma using dexamethasone as internal standard (IS). The chromatographic separation was performed with a Poroshell 120 EC‐C₁₈ column. The mobile phase consisted of water (A) and acetonitrile (B), both containing 10 m m of ammonium formate and 0.1% formic acid, delivered in the form of elution gradient. The LAFIS10 was monitored using an electrospray ionization interface operating in the positive mode in multiple reaction monitoring mode, monitoring the transitions 681.47 → 538.2 for LAFIS10 and 393.20 → 355.30 for the IS. The flow rate was 500 μL/min. The column temperature was kept at 40 °C and the injection volume was 2 μL. The lower limit of quantification was of 10 ng/mL and linearity between 10 and 1000 ng/mL was observed, with an R² > 0.99. The accuracy of the method was >90%. The relative standard deviations intra‐ and interday were <8.80 and <6.37%, respectively. The method showed sensitivity, linearity, precision, accuracy and selectivity required to quantify LAFIS 10 in preclinical pharmacokinetic studies according to criteria established by the US Food and Drug Administration and European Medicines Agency. Copyright © 2014 John Wiley & Sons, Ltd.     

An efficient,mild and selective Ullmann‐type N‐arylation of indoles catalysed by Pd immobilized on amidoxime‐functionalized mesoporous SBA‐15 as heterogeneous and recyclable nanocatalyst

A wide range of N‐arylated indoles were selectively synthesized through intermolecular C(aryl)? N bond formation from the corresponding aryl iodides and indoles through Ullmann‐type coupling reactions in the presence of a catalytic amount of Pd immobilized on amidoxime‐functionalized mesoporous SBA‐15 (SBA‐15/AO/Pd(0)) under mild reaction conditions. These cross‐coupled products were obtained in excellent yields under mild conditions at extremely low palladium loading (ca 0.3 mol%), and the heterogeneous catalyst can be readily recovered by simple filtration and reused seven times with loss in its activity. Copyright © 2015 John Wiley & Sons, Ltd.